Good quality Carbon Steel Investment Casting - Carbon Steel Casting Product by Investment Casting – RMC Foundry

China OEM custom carbon steel castings by lost wax investment casting and CNC precision machining.

Carbon alloy is the group of iron-carbon alloy with rare of other chemical elements such as Si, Mn, P and S. According to the level of carbon content, carbon steel for casting is generally divided into low carbon steel, medium carbon steel and high carbon steel. The cast carbon steels of all countries in the world are generally classified according to their strength, and corresponding grades are formulated.

Regarding the chemical composition of carbon steel, except for phosphorus and sulfur, there are no restrictions or only upper limits on other chemical elements. Under the above premise, the chemical composition of cast carbon steel is determined by the foundry according to the required mechanical properties.

The heat treatment methods of carbon steel castings are usually annealing, normalizing or normalizing + tempering. For some high carbon steel castings, quenching and tempering can also be used, that is, quenching + high temperature tempering, so as to improve the comprehensive mechanical properties of carbon steel castings. Small carbon steel castings can be directly quenched and tempered from the as-cast state. For large-scale or complex-shaped carbon steel castings, it is appropriate to perform quenching and tempering treatment after normalizing treatment.

The Advantages of Investment Casting：
✔ Excellent and smooth surface finish
✔ Tight dimensional tolerances.
✔ Complex and intricate shapes with design flexibility
✔ Capability to cast thin walls therefore a lighter casting component
✔ Wide selection of cast metals and alloys (ferrous and non-ferrous)
✔ Draft is not required in the molds design.
✔ Reduce the need for secondary machining.
✔ Low material waste.

The Steps of Investment Casting Process:
During the investment casting process, a wax pattern is coated with a ceramic material, which, when hardened, adopts the internal geometry of the desired casting. In most cases, multiple parts are cast together for high efficiency by attaching individual wax patterns to a central wax stick called a sprue. The wax is melted out of the pattern – which is why it is also known as the lost wax process – and molten metal is poured into the cavity. When the metal solidifies, the ceramic mold is shaken off, leaving the near net shape of the desired casting, followed by finishing, testing and packaging.