Popular Design for Bronze Foundry - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry

Short Description:

Product Detail

Product Tags

Feedback (2)

Our pursuit and enterprise aim would be to "Always fulfill our buyer requirements". We carry on to acquire and layout excellent quality items for the two our old and new clients and realize a win-win prospect for our shoppers in addition as us for Lost Foam Casting Parts , Aluminium Green Sand Casting , Iron Casting Foundry , To learn more about what we can easily do in your case, make contact with us at any time. We glance forward to developing superior and long-term organization interactions along with you.

Popular Design for Bronze Foundry - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry Detail:

China OEM custom stainless steel impeller by lost wax investment casting process.

The base alloy elements of any nickel-base or stainless steel investment casting are chromium, nickel, and molybdenum (or “moly”). These three components will determine the casting’s grain structure and mechanical properties and will be instrumental in the casting’s ability to combat heat, wear, and corrosion.

Stainless steel has a minimum chromium content of 10.5%, making it more resistant to corrosive liquid environments and to oxidation. However, this is not absolute. Stainless steel investment castings are “corrosion-resistant” when used in liquid environments and vapors below 1200°F (650°C) and “heat-resistant” when used above this temperature.

Advantages of Investment Casting Components:
- Excellent and smooth surface finish
- Tight dimensional tolerances.
- Complex and intricate shapes with design flexibility
- Capability to cast thin walls therefore a lighter casting component
- Wide selection of cast metals and alloys (ferrous and non-ferrous)
- Draft is not required in the molds design.
- Reduce the need for secondary machining.
- Low material waste.

Materials for Investment Casting Process at RMC Foundry
Category	China Grade	US Grade	Germany Grade
Ferritic Stainless Steel	1Cr17, 022Cr12, 10Cr17,	430, 431, 446, CA-15, CA6N, CA6NM	1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4
Martensitic Stainless Steel	1Cr13, 2Cr13, 3Cr13, 4Cr13,	410, 420, 430, 440B, 440C	1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125
Austenitic stainless steel	06Cr19Ni10, 022Cr19Ni10, 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5	302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN	1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4406, 1.4408, 1.4409, 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581, 1.4582, 1.4584,
Precipitation Hardening Stainless Steel	05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb	630, 634, 17-4PH, 15-5PH, CB7Cu-1	1.4542
Duplex Stainless Steel	022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N	A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A, A 995 1B, A 995 4A, A 995 5A, 2205, 2507	1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770
High Mn Steel	ZGMn13-1, ZGMn13-3, ZGMn13-5	B2, B3, B4	1.3802, 1.3966, 1.3301, 1.3302
Tool Steel	Cr12	A5, H12, S5	1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12
Heat Resistant Steel	20Cr25Ni20, 16Cr23Ni13, 45Cr14Ni14W2Mo	309, 310, CK20, CH20, HK30	1.4826, 1.4828, 1.4855, 1.4865
Nickle-base Alloy		HASTELLY-C, HASTELLY-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX(66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35-1, INCOLOY600, INCOLOY625	2.4815, 2.4879, 2.4680
Aluminum Alloy	ZL101, ZL102, ZL104	ASTM A356, ASTM A413, ASTM A360	G-AlSi7Mg, G-Al12
Copper Alloy	H96, H85, H65, HPb63-3, HPb59-1, QSn6.5-0.1, QSn7-0.2	C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800, C52100, C51100	CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5
Cobalt-base Alloy		UMC50, 670, Grade 31	2.4778

INVESTMENT CASTING TOLERANCES
Inches		Millimeters
Dimension	Tolerance	Dimension	Tolerance
Up to 0.500	±.004″	Up to 12.0	± 0.10mm
0.500 to 1.000”	±.006″	12.0 to 25.0	± 0.15mm
1.000 to 1.500”	±.008″	25.0 to 37.0	± 0.20mm
1.500 to 2.000”	±.010″	37.0 to 50.0	± 0.25mm
2.000 to 2.500”	±.012″	50.0 to 62.0	± 0.30mm
2.500 to 3.500”	±.014″	62.0 to 87.0	± 0.35mm
3.500 to 5.000”	±.017″	87.0 to 125.0	± 0.40mm
5.000 to 7.500”	±.020″	125.0 to190.0	± 0.50mm
7.500 to 10.000”	±.022″	190.0 to 250.0	± 0.57mm
10.000 to 12.500”	±.025″	250.0 to 312.0	± 0.60mm
12.500 to 15.000	±.028″	312.0 to 375.0	± 0.70mm

stainless steel castings by investment casting

Stainless Steel Castings by Investment Casting

Product detail pictures:

Related Product Guide:

"Quality initial, Honesty as base, Sincere support and mutual profit" is our idea, so as to build repeatedly and pursue the excellence for Popular Design for Bronze Foundry - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry, The product will supply to all over the world, such as: Nepal , Armenia , Russia , We've got sufficient experience in producing products according to samples or drawings. We warmly welcome customers from home and abroad to visit our company, and to cooperate with us for a splendid future together.

Alloy Steel Casting Foundry

Alloy Steel Precision Casting

Brass No Bake Casting

Casting

Ductile Iron Casting Parts

Duplex Stainless Steel Precision Casting

Gray Iron No Bake Casting

Precision Casting Foundry

Steel Shell Casting

Steel Shell Casting Foundry

We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.

By Alma from Rio de Janeiro - 2018.03.03 13:09

We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.

By Dawn from UK - 2017.06.16 18:23