Factory best selling Steel Precision Casting Manufacturer - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry Detail:
China OEM custom stainless steel impeller by lost wax investment casting process.
The base alloy elements of any nickel-base or stainless steel investment casting are chromium, nickel, and molybdenum (or “moly”). These three components will determine the casting’s grain structure and mechanical properties and will be instrumental in the casting’s ability to combat heat, wear, and corrosion.
Stainless steel has a minimum chromium content of 10.5%, making it more resistant to corrosive liquid environments and to oxidation. However, this is not absolute. Stainless steel investment castings are “corrosion-resistant” when used in liquid environments and vapors below 1200°F (650°C) and “heat-resistant” when used above this temperature.
Advantages of Investment Casting Components:
- Excellent and smooth surface finish
- Tight dimensional tolerances.
- Complex and intricate shapes with design flexibility
- Capability to cast thin walls therefore a lighter casting component
- Wide selection of cast metals and alloys (ferrous and non-ferrous)
- Draft is not required in the molds design.
- Reduce the need for secondary machining.
- Low material waste.
Materials for Investment Casting Process at RMC Foundry | |||
Category | China Grade | US Grade | Germany Grade |
Ferritic Stainless Steel | 1Cr17, 022Cr12, 10Cr17, | 430, 431, 446, CA-15, CA6N, CA6NM | 1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4 |
Martensitic Stainless Steel | 1Cr13, 2Cr13, 3Cr13, 4Cr13, | 410, 420, 430, 440B, 440C | 1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125 |
Austenitic stainless steel | 06Cr19Ni10, 022Cr19Ni10, 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5 |
302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN | 1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4406, 1.4408, 1.4409, 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581, 1.4582, 1.4584, |
Precipitation Hardening Stainless Steel | 05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb | 630, 634, 17-4PH, 15-5PH, CB7Cu-1 | 1.4542 |
Duplex Stainless Steel | 022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N | A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A, A 995 1B, A 995 4A, A 995 5A, 2205, 2507 |
1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770 |
High Mn Steel | ZGMn13-1, ZGMn13-3, ZGMn13-5 | B2, B3, B4 | 1.3802, 1.3966, 1.3301, 1.3302 |
Tool Steel | Cr12 | A5, H12, S5 | 1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12 |
Heat Resistant Steel | 20Cr25Ni20, 16Cr23Ni13, 45Cr14Ni14W2Mo |
309, 310, CK20, CH20, HK30 | 1.4826, 1.4828, 1.4855, 1.4865 |
Nickle-base Alloy | HASTELLY-C, HASTELLY-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX(66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35-1, INCOLOY600, INCOLOY625 |
2.4815, 2.4879, 2.4680 | |
Aluminum Alloy |
ZL101, ZL102, ZL104 | ASTM A356, ASTM A413, ASTM A360 | G-AlSi7Mg, G-Al12 |
Copper Alloy | H96, H85, H65, HPb63-3, HPb59-1, QSn6.5-0.1, QSn7-0.2 |
C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800, C52100, C51100 | CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5 |
Cobalt-base Alloy | UMC50, 670, Grade 31 | 2.4778 |
INVESTMENT CASTING TOLERANCES | |||
Inches | Millimeters | ||
Dimension | Tolerance | Dimension | Tolerance |
Up to 0.500 | ±.004″ | Up to 12.0 | ± 0.10mm |
0.500 to 1.000” | ±.006″ | 12.0 to 25.0 | ± 0.15mm |
1.000 to 1.500” | ±.008″ | 25.0 to 37.0 | ± 0.20mm |
1.500 to 2.000” | ±.010″ | 37.0 to 50.0 | ± 0.25mm |
2.000 to 2.500” | ±.012″ | 50.0 to 62.0 | ± 0.30mm |
2.500 to 3.500” | ±.014″ | 62.0 to 87.0 | ± 0.35mm |
3.500 to 5.000” | ±.017″ | 87.0 to 125.0 | ± 0.40mm |
5.000 to 7.500” | ±.020″ | 125.0 to190.0 | ± 0.50mm |
7.500 to 10.000” | ±.022″ | 190.0 to 250.0 | ± 0.57mm |
10.000 to 12.500” | ±.025″ | 250.0 to 312.0 | ± 0.60mm |
12.500 to 15.000 | ±.028″ | 312.0 to 375.0 | ± 0.70mm |
Stainless Steel Castings by Investment Casting
Product detail pictures:
Related Product Guide:
Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for Factory best selling Steel Precision Casting Manufacturer - Custom Stainless Steel Impeller by Investment Casting – RMC Foundry, The product will supply to all over the world, such as: Zimbabwe , Tunisia , Senegal , Insisting over the high-quality generation line management and prospects guide provider, we have made our resolution to offer our shoppers using the initially stage purchasing and soon after provider working experience. Preserving the prevailing helpful relations with our prospects, we even now innovate our product lists the many time to meet up with the brand new wants and stick to the latest trend of this business in Ahmedabad. We're ready to facial area the difficulties and make the transform to grasp many of the possibilities in international trade.
By Philipppa from Czech - 2018.12.11 14:13
With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
By Octavia from Melbourne - 2018.09.23 18:44