Chinese Professional Stainless Steel Lost Wax Casting - Gray Cast Iron Investment Casting – RMC Foundry Detail:
Gray cast iron castings are usually produced by sand casting process, however, for some castings which require precision accuracy and have complex structure, the investment casting process is also a good choice.
When we cast the gray iron, we strictly follow the chemical composition and mechanical properties according to the stardards or requirements from the customers. Besides, we have the ability and equipment to test if there is casting defects inside the gray iron sand castings.
Though cast irons can have a carbon percentage between 2 to 6.67, the practical limit is normally between 2 and 4%. These are important mainly because of their excellent casting qualities. Gray iron is cheaper than ductile iron, but it has much lower tensile strength and ductility than ductile iron. Gray iron can not replace the carbon steel, while the ductile iron could replace the carbon steel in some situation due the high tensile strength, yield strength and elongation of ductile iron.
Investment (lost wax) casting is a method of precision casting complex near-net-shape details using replication of wax patterns. Investment casting or lost wax is a metal casting process that typically uses a wax pattern surrounded by a ceramic shell to make a ceramic mold. When the shell dries, the wax is melted away, leaving only the mold. Then the casting component is formed by pouring molten metal into the ceramic mold.
Silica sol casting process is the main investment casting process of RMC investment casting foundry. We have been developing new technology of adhesive material to achieve much more economical and effective adhesive material to build the slurry shell. It is a overwhelming trend that Silica sol casting process replaces the rough inferior water glass process, especially for stainless steel casting and alloy steel casting. Besides the innovated molding material, the silica sol casting process has also being innovated to much steadier and less heat expanding.
Item according to DIN EN 1561 | Measure | Unit | EN-GJL-150 | EN-GJL-200 | EN-GJL-250 | EN-GJL-300 | EN-GJL-350 |
EN-JL 1020 | EN-JL 1030 | EN-JL 1040 | EN-JL 1050 | EN-JL 1060 | |||
Tensile Strength | Rm | MPA | 150-250 | 200-300 | 250-350 | 300-400 | 350-450 |
0.1% Yield Strength | Rp0,1 | MPA | 98-165 | 130-195 | 165-228 | 195-260 | 228-285 |
Elongation Strength | A | % | 0,3 – 0,8 | 0,3 – 0,8 | 0,3 – 0,8 | 0,3 – 0,8 | 0,3 – 0,8 |
Compressive Strength | σdB | MPa | 600 | 720 | 840 | 960 | 1080 |
0,1% Compressive Strength | σd0,1 | MPa | 195 | 260 | 325 | 390 | 455 |
Flexural Strength | σbB | MPa | 250 | 290 | 340 | 390 | 490 |
Schuifspanning | σaB | MPa | 170 | 230 | 290 | 345 | 400 |
Shear Stress | TtB | MPa | 170 | 230 | 290 | 345 | 400 |
Modules of elasticity | E | GPa | 78 – 103 | 88 – 113 | 103 – 118 | 108 – 137 | 123 – 143 |
Poisson number | v | – | 0,26 | 0,26 | 0,26 | 0,26 | 0,26 |
Brinell hardness | HB | 160 – 190 | 180 – 220 | 190 – 230 | 200 – 240 | 210 – 250 | |
Ductility | σbW | MPa | 70 | 90 | 120 | 140 | 145 |
Tension and pressure change | σzdW | MPa | 40 | 50 | 60 | 75 | 85 |
Breaking Strength | Klc | N/mm3/2 | 320 | 400 | 480 | 560 | 650 |
Density | g/cm3 | 7,10 | 7,15 | 7,20 | 7,25 | 7,30 |
Product detail pictures:
Related Product Guide:
The organization keeps for the procedure concept "scientific administration, superior quality and effectiveness primacy, shopper supreme for Chinese Professional Stainless Steel Lost Wax Casting - Gray Cast Iron Investment Casting – RMC Foundry, The product will supply to all over the world, such as: Peru , Czech republic , Turkey , We can meet the various needs of customers at home and abroad. We welcome new and old customers to come to consult & negotiate with us. Your satisfaction is our motivation! Let us work together to write a brilliant new chapter!
By Arthur from Albania - 2017.06.25 12:48
Products and services are very good, our leader is very satisfied with this procurement, it is better than we expected,
By Louis from Czech Republic - 2018.06.05 13:10