Investment Casting Foundry | Sand Casting Foundry from China

Stainless Steel Castings, Grey Iron Castings, Ductile Iron Castings

China wholesale Gray Iron Casting - Gray Cast Iron Investment Casting – RMC Foundry

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have been ready to share our knowledge of advertising and marketing worldwide and recommend you suitable products and solutions at most competitive price ranges. So Profi Tools supply you best benefit of money and we're ready to create with each other with Steel Shell Casting Foundry , Brass Lost Foam Casting , Stainless Steel Vacuum Casting , We are expecting to cooperate with you on the basis of mutual benefits and common development. We will never disappoint you.
China wholesale Gray Iron Casting - Gray Cast Iron Investment Casting – RMC Foundry Detail:

Gray cast iron castings are usually produced by sand casting process, however, for some castings which require precision accuracy and have complex structure, the investment casting process is also a good choice.

When we cast the gray iron, we strictly follow the chemical composition and mechanical properties according to the stardards or requirements from the customers. Besides, we have the ability and equipment to test if there is casting defects inside the gray iron sand castings.

Though cast irons can have a carbon percentage between 2 to 6.67, the practical limit is normally between 2 and 4%. These are important mainly because of their excellent casting qualities. Gray iron is cheaper than ductile iron, but it has much lower tensile strength and ductility than ductile iron. Gray iron can not replace the carbon steel, while the ductile iron could replace the carbon steel in some situation due the high tensile strength, yield strength and elongation of ductile iron.

Investment (lost wax) casting is a method of precision casting complex near-net-shape details using replication of wax patterns. Investment casting or lost wax is a metal casting process that typically uses a wax pattern surrounded by a ceramic shell to make a ceramic mold. When the shell dries, the wax is melted away, leaving only the mold. Then the casting component is formed by pouring molten metal into the ceramic mold.

Silica sol casting process is the main investment casting process of RMC investment casting foundry. We have been developing new technology of adhesive material to achieve much more economical and effective adhesive material to build the slurry shell. It is a overwhelming trend that Silica sol casting process replaces the rough inferior water glass process, especially for stainless steel casting and alloy steel casting. Besides the innovated molding material, the silica sol casting process has also being innovated to much steadier and less heat expanding.

Item according to DIN EN 1561 Measure Unit EN-GJL-150 EN-GJL-200 EN-GJL-250 EN-GJL-300 EN-GJL-350
EN-JL 1020 EN-JL 1030 EN-JL 1040 EN-JL 1050 EN-JL 1060
Tensile Strength Rm MPA 150-250 200-300 250-350 300-400 350-450
0.1% Yield Strength Rp0,1 MPA 98-165 130-195 165-228 195-260 228-285
Elongation Strength A % 0,3 – 0,8 0,3 – 0,8 0,3 – 0,8 0,3 – 0,8 0,3 – 0,8
Compressive Strength σdB MPa 600 720 840 960 1080
0,1% Compressive Strength σd0,1 MPa 195 260 325 390 455
Flexural Strength σbB MPa 250 290 340 390 490
Schuifspanning σaB MPa 170 230 290 345 400
Shear Stress TtB MPa 170 230 290 345 400
Modules of elasticity E GPa 78 – 103 88 – 113 103 – 118 108 – 137 123 – 143
Poisson number v 0,26 0,26 0,26 0,26 0,26
Brinell hardness HB 160 – 190 180 – 220 190 – 230 200 – 240 210 – 250
Ductility σbW MPa 70 90 120 140 145
Tension and pressure change σzdW MPa 40 50 60 75 85
Breaking Strength Klc N/mm3/2 320 400 480 560 650
Density g/cm3 7,10 7,15 7,20 7,25 7,30

gray iron castings


Product detail pictures:

China wholesale Gray Iron Casting -
 Gray Cast Iron Investment Casting – RMC Foundry detail pictures


Related Product Guide:

We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for China wholesale Gray Iron Casting - Gray Cast Iron Investment Casting – RMC Foundry, The product will supply to all over the world, such as: Sydney , South Korea , El Salvador , Our company's main items are widely used all over the world; 80% of our products and solutions exported to the United States, Japan, Europe and other markets. All stuff sincerely welcome guests come to visit our factory.
  • High Quality, High Efficiency, Creative and Integrity, worth having long-term cooperation! Looking forward to the future cooperation!
    5 Stars By Miguel from Rotterdam - 2017.05.02 11:33
    Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Madge from Danish - 2017.06.19 13:51