China Gold Supplier for Steel Shell Casting Foundry - Gray Cast Iron Investment Casting – RMC Foundry

Short Description:

Product Detail

Product Tags

Feedback (2)

Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for Steel Full Mold Castinig , Gray Iron Lost Foam Casting Foundry , Ductile Iron Shell Casting , We have deep cooperation with hundreds of factories around China. The products we provide can match with your different demands. Choose us, and we won't make you regret!

China Gold Supplier for Steel Shell Casting Foundry - Gray Cast Iron Investment Casting – RMC Foundry Detail:

Gray cast iron castings are usually produced by sand casting process, however, for some castings which require precision accuracy and have complex structure, the investment casting process is also a good choice.

When we cast the gray iron, we strictly follow the chemical composition and mechanical properties according to the stardards or requirements from the customers. Besides, we have the ability and equipment to test if there is casting defects inside the gray iron sand castings.

Though cast irons can have a carbon percentage between 2 to 6.67, the practical limit is normally between 2 and 4%. These are important mainly because of their excellent casting qualities. Gray iron is cheaper than ductile iron, but it has much lower tensile strength and ductility than ductile iron. Gray iron can not replace the carbon steel, while the ductile iron could replace the carbon steel in some situation due the high tensile strength, yield strength and elongation of ductile iron.

Investment (lost wax) casting is a method of precision casting complex near-net-shape details using replication of wax patterns. Investment casting or lost wax is a metal casting process that typically uses a wax pattern surrounded by a ceramic shell to make a ceramic mold. When the shell dries, the wax is melted away, leaving only the mold. Then the casting component is formed by pouring molten metal into the ceramic mold.

Silica sol casting process is the main investment casting process of RMC investment casting foundry. We have been developing new technology of adhesive material to achieve much more economical and effective adhesive material to build the slurry shell. It is a overwhelming trend that Silica sol casting process replaces the rough inferior water glass process, especially for stainless steel casting and alloy steel casting. Besides the innovated molding material, the silica sol casting process has also being innovated to much steadier and less heat expanding.

Item according to DIN EN 1561	Measure	Unit	EN-GJL-150	EN-GJL-200	EN-GJL-250	EN-GJL-300	EN-GJL-350
Item according to DIN EN 1561	Measure	Unit	EN-JL 1020	EN-JL 1030	EN-JL 1040	EN-JL 1050	EN-JL 1060
Tensile Strength	Rm	MPA	150-250	200-300	250-350	300-400	350-450
0.1% Yield Strength	Rp0,1	MPA	98-165	130-195	165-228	195-260	228-285
Elongation Strength	A	%	0,3 – 0,8	0,3 – 0,8	0,3 – 0,8	0,3 – 0,8	0,3 – 0,8
Compressive Strength	σdB	MPa	600	720	840	960	1080
0,1% Compressive Strength	σd0,1	MPa	195	260	325	390	455
Flexural Strength	σbB	MPa	250	290	340	390	490
Schuifspanning	σaB	MPa	170	230	290	345	400
Shear Stress	TtB	MPa	170	230	290	345	400
Modules of elasticity	E	GPa	78 – 103	88 – 113	103 – 118	108 – 137	123 – 143
Poisson number	v	–	0,26	0,26	0,26	0,26	0,26
Brinell hardness		HB	160 – 190	180 – 220	190 – 230	200 – 240	210 – 250
Ductility	σbW	MPa	70	90	120	140	145
Tension and pressure change	σzdW	MPa	40	50	60	75	85
Breaking Strength	Klc	N/mm3/2	320	400	480	560	650
Density		g/cm3	7,10	7,15	7,20	7,25	7,30

gray iron castings

Product detail pictures:

Related Product Guide:

The corporate upholds the philosophy of "Be No.1 in excellent, be rooted on credit rating and trustworthiness for growth", will keep on to serve outdated and new clients from home and abroad whole-heatedly for China Gold Supplier for Steel Shell Casting Foundry - Gray Cast Iron Investment Casting – RMC Foundry, The product will supply to all over the world, such as: Jordan , Cologne , Vancouver , They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.

Alloy Steel Casting Supplier