2020 Latest Design Stainless Steel Precision Casting Foundry - B-100 Camlock of Stainless Steel 316 – RMC Foundry

Short Description:

Product Detail

Product Tags

Feedback (2)

Our enhancement depends around the sophisticated devices ,exceptional talents and repeatedly strengthened technology forces for Gray Iron Lost Foam Casting , Bronze Casting Foundry , Bronze Gravity Casting , Our ultimate target is usually to rank as a top brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you!

2020 Latest Design Stainless Steel Precision Casting Foundry - B-100 Camlock of Stainless Steel 316 – RMC Foundry Detail:

Custom or standard stainless steel 316 camlock by investment casting process and CNC machining.

Stainless steel has a minimum chromium content of 10.5%, making it more resistant to corrosive liquid environments and to oxidation. However, this is not absolute. Stainless steel investment castings are “corrosion-resistant” when used in liquid environments and vapors below 1200°F (650°C) and “heat-resistant” when used above this temperature. AISI 316 is an austenitic stainless steel which is widely used for investment castings.

Austenitic stainless steel should be solid-solution treated before use, so as to maximize the solid solution of various precipitates such as carbides in the steel into the austenite matrix, while also homogenizing the structure and eliminating stress, so as to ensure excellent Corrosion resistance and mechanical properties. The correct solution treatment system is water cooling after heating at 1050～1150℃ (the thin parts can also be air cooled). The solution treatment temperature depends on the degree of alloying of the steel: Molybdenum-free or low-molybdenum steel grades should be lower (≤1100℃), and higher alloyed grades such as 00Cr20Ni18Mo-6CuN, 00Cr25Ni22Mo2N, etc. should be higher (1080～1150) ℃).

Capabilities of Investment Casting Foundry:

• Max Size: 1,000 mm × 800 mm × 500 mm
• Weight Range: 0.5 kg – 100 kg
• Annual Capacity: 2,000 tons
• Bond Materials for Shell Building: Silica Sol, Water Glass and their mixtures.
• Tolerances: On Request.

Advantages of Investment Casting Components:

- Excellent and smooth surface finish
- Tight dimensional tolerances.
- Complex and intricate shapes with design flexibility
- Capability to cast thin walls therefore a lighter casting component
- Wide selection of cast metals and alloys (ferrous and non-ferrous)
- Draft is not required in the molds design.
- Reduce the need for secondary machining.
- Low material waste.

Materials for Investment Casting Process at RMC Foundry
Category	China Grade	US Grade	Germany Grade
Ferritic Stainless Steel	1Cr17, 022Cr12, 10Cr17,	430, 431, 446, CA-15, CA6N, CA6NM	1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4
Martensitic Stainless Steel	1Cr13, 2Cr13, 3Cr13, 4Cr13,	410, 420, 430, 440B, 440C	1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125
Austenitic stainless steel	06Cr19Ni10, 022Cr19Ni10, 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5	302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN	1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4406, 1.4408, 1.4409, 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581, 1.4582, 1.4584,
Precipitation Hardening Stainless Steel	05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb	630, 634, 17-4PH, 15-5PH, CB7Cu-1	1.4542
Duplex Stainless Steel	022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N	A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A, A 995 1B, A 995 4A, A 995 5A, 2205, 2507	1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770
High Mn Steel	ZGMn13-1, ZGMn13-3, ZGMn13-5	B2, B3, B4	1.3802, 1.3966, 1.3301, 1.3302
Tool Steel	Cr12	A5, H12, S5	1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12
Heat Resistant Steel	20Cr25Ni20, 16Cr23Ni13, 45Cr14Ni14W2Mo	309, 310, CK20, CH20, HK30	1.4826, 1.4828, 1.4855, 1.4865
Nickle-base Alloy		HASTELLY-C, HASTELLY-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX(66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35-1, INCOLOY600, INCOLOY625	2.4815, 2.4879, 2.4680
Aluminum Alloy	ZL101, ZL102, ZL104	ASTM A356, ASTM A413, ASTM A360	G-AlSi7Mg, G-Al12
Copper Alloy	H96, H85, H65, HPb63-3, HPb59-1, QSn6.5-0.1, QSn7-0.2	C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800, C52100, C51100	CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5
Cobalt-base Alloy		UMC50, 670, Grade 31	2.4778

INVESTMENT CASTING TOLERANCES
Inches		Millimeters
Dimension	Tolerance	Dimension	Tolerance
Up to 0.500	±.004″	Up to 12.0	± 0.10mm
0.500 to 1.000”	±.006″	12.0 to 25.0	± 0.15mm
1.000 to 1.500”	±.008″	25.0 to 37.0	± 0.20mm
1.500 to 2.000”	±.010″	37.0 to 50.0	± 0.25mm
2.000 to 2.500”	±.012″	50.0 to 62.0	± 0.30mm
2.500 to 3.500”	±.014″	62.0 to 87.0	± 0.35mm
3.500 to 5.000”	±.017″	87.0 to 125.0	± 0.40mm
5.000 to 7.500”	±.020″	125.0 to190.0	± 0.50mm
7.500 to 10.000”	±.022″	190.0 to 250.0	± 0.57mm
10.000 to 12.500”	±.025″	250.0 to 312.0	± 0.60mm
12.500 to 15.000	±.028″	312.0 to 375.0	± 0.70mm