Manufacturer for Products by Application – Alloy Steel Lost Wax Casting Part – RMC Foundry Detail:
Alloy steel castings are very extensive in terms of metal and alloy selection. For example, the cast steel covers a wide range of alloys such as low carbon steel, medium carbon steel, high carbon steel, alloy steel, high alloy steel, stainless steel, duplex stainless steel, precipitation hardening stainless and other special steel alloys.
Steel castings are combination of casting molding process and steel material metallurgy. They can not only have complex structure that are difficult to obtain by other forming processes, but also maintain the unique properties of steel, so the steel casting parts have a high important position in engineering structural materials. In most foundries, steel castings are mainly produced through these several casting processes: lost wax casting, lost foam casting, vacuum casting, sand casting and resin coated sand casting.
Mechanical Properties of Alloy Steel 20Cr and Alloy Steel 35CrMo |
||
Content | Mechanical Properties | |
20Cr (≥) | 35CrMo | |
sв (tensile strength), MPa | ≥ 835 | ≥ 980 |
sT (yield strength), MPa | ≥ 540 | ≥ 835 |
d5 (elogation), | ≥ 10 | ≥ 12 |
y (сontraction) | ≥ 40 | ≥ 45 |
KCU (impact) , kJ/㎡ | ≥ 47 | ≥ 63 |
Performance Characteristics of Alloy Steel Castings
- • Poor fluidity and volume shrinkage and linear shrinkage are relatively large
- • Comprehensive mechanical properties are relatively high. Compressive strength and tensile strength are equal
- • Poor shock absorption and high notch sensitivity
- • Low carbon steel castings have relatively good weldability.
Structural Characteristics of Alloy Steel Castings
- • The minimum wall thickness of steel castings should be greater than the minimum wall thickness of gray cast iron. It is not suitable to design too complex castings
- • Steel castings have relatively large internal stress and are easy to bend and deform
- • The structure should minimize hot nodes and conditions for sequential solidification should be created
- • The fillet of the connecting wall and the transition section of different thickness are larger than those of cast iron
- • Complicated castings can be designed into a casting + welding structure to facilitate casting production
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Manufacturer for Products by Application – Alloy Steel Lost Wax Casting Part – RMC Foundry, The product will supply to all over the world, such as: Thailand , Zimbabwe , Croatia , If you are for any reason unsure which product to select, do not hesitate to contact us and we will be delighted to advise and assist you. This way we will be providing you with all the knowledge needed to make the best choice. Our company strictly follows "Survive by good quality, Develop by keeping good credit. " operation policy. Welcome all the clients old and new to visit our company and talk about the business. We are looking for more and more customers to create the glorious future.
By Chris from Swiss - 2018.06.18 17:25
The quality of the products is very good, especially in the details, can be seen that the company work actively to satisfy customer's interest, a nice supplier.
By Tyler Larson from Argentina - 2017.06.25 12:48